US
UNICOR FPI BASTROP (KITMOBILEDEVICEMNT)
Set-aside: Total Small Business Set-Aside (FAR 19.5) NAICS: 423120 PSC: 2540 Place of performance: Bastrop, Texas, United States
Past awards & closed tenders
43 closed tenders & past awards across 31 jurisdictions.
US
UNICOR FPI BASTROP VEHICLE KITS
Price and delivery time considered.
US
UNICOR FPI BASTROP FIRE EXTINGUISHERS/STRAPS
Contract was based on price with delivery date taken into consideration. Industrial Specialist was contacted via email on one quote for HWS6002 and was determined that product quoted did not meet the specifications noted on the RFQ.
US
REQUEST FOR QUOTATION FPI BASTROP PARTITION
Set-aside: Total Small Business Set-Aside (FAR 19.5) NAICS: 423120 PSC: 2540 Place of performance: Bastrop, Texas, United States
US
REQUEST FOR QUOTATION FPI BASTROP (BAS0164/AHW7207)
Contracting officer determined pricing to be fair and reasonable.
USAngola
Closed Jul 12, 2026US EMBASSY LUANDA VEHICLES PURCHASE
4WD SUVs and HIGH ROOF PASSENGER’S VANs. Post requires 2025-2027 model year SUV and passenger VANs (3 each) in previously unsold, new condition as replacement vehicles for current ICASS assets. Post intends to pursue a brand name or equal approach, citing Toyota Land Cruisers and Ford Transit (passenger vans) or equivalent models as the basis, respectively. Toyota and Ford models integrate with the current fleet to simplify support, and parts are the most readily available in Angola’s limited vehicle support market. However, alternatives that meet specifications / stated salient characteristics may be acceptable. Thus, the brand name or equal approach.
USJordan
Closed Jun 21, 2026Supply and Deliver One New Vehicle
Enclosed is a Request for Quotations (RFQ) for supply and delivery of a brand new vehicle. If you would like to submit quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 (Box 8) that follows this letter. Quotations are due by June 21, 2026, at 16:30 PM (Amman Time GMT+3). Quotations MUST be submitted by email to AmmanRFQ@state.gov. Offers sent to any other address or addressed to specific individuals will NOT be considered. Offers MUST be in the following format to be considered acceptable: • Email subject line to include [Company/Offeror Name] and RFQ 19J01026Q0011. • Attach all documents to the e-mail (Microsoft Word or PDF). We will not accept offers that include links, unsolicited offers, or hard copies. • Offers submitted after the deadline or to the incorrect email address will not be considered. In addition to the Technical Proposal, offers must include the following for the package to be considered complete: • SF-1442; • Section I Pricing; • Section 5, Representations and Certifications; • Additional information as required in Section 3; • Proof of Active SAM Registration. The U.S. Government intends to award a contract/purchase order to the responsible company submitting a technically acceptable quotation at the lowest price. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is need to do so The U.S. Embassy is prohibited from procuring goods or services from any firms that are not registered in the System for Award Management (SAM). SAM is an integrated procurement database and serves as a single point of entry for vendors seeking to do business with the U.S. Government. For any enquiries/questions please email: AmmanRFQQuestions@state.gov no later than June 8, 2026, at 15:00 P.M. (Amman Time GMT+3). Answers will follow after a maximum of three business days and will be posted on the Embassy website
US
Closed Jun 12, 2026W912CH-25-Q-0015 for Airflow Valve; NSN: 4240-01-055-1493
1. The attached request for quotation (RFQ) is intended to result in a firm-fixed-price (FFP) contract for the supply identified below: REQUIREMENT NOUN: Airflow Valve NSN: 4240-01-055-1493 PART NO.: 5-19-6136 PRODUCTION QUANTITY: 6 EA OPTION QUANTITY: Up to 100% UNIT OF ISSUE: Each (EA) FIRST ARTICLE TEST REPORT: Required 2. There is a technical data package (TDP) associated with this procurement. The TDP is distribution code "C", which limits access to Department of Defense (DOD) and U.S. DOD contractors. Please refer to Section C for additional information. 3. Military preservation, packing and marking are required and shall be accomplished in accordance with Section D, all applicable requirements of MIL-STD-2073-1 and special packaging instruction (SPI) contained in the TDP. 4. The RFQ contains provisions and clauses that require you, the offeror, to complete fill-ins and/or representations. Please review and complete all such items. Otherwise, your offer may be deemed ineligible for award. 5. TO BE CONSIDERED FOR AWARD: Please submit one signed copy of your offer, in accordance with Section A, no later than Friday, 12-June-2026 at 1:00 p.m. local time - Warren, MI. All offers submitted in response to the RFQ shall be valid for a minimum of ninety (90) calendar days following the offer due date. 6. All questions pertaining to the RFQ shall be submitted in writing to: George Campbell CONTRACT SPECIALIST, ARMY CONTRACTING COMMAND - DETROIT ARSENAL E-MAIL: george.l.campbell45.civ@army.mil
US
Closed Jun 10, 2026UNICOR FPI LA TUNA VEHICLE COMPONENTS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number WM26-006LA is issued as a Request For Proposal. It is the Government's intent that this notice will result in single award. Federal Prison Industries, La Tuna is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is not set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries La Tuna 8500 Doniphan Dr., Anthony TX 79821-9346. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Wayne Mayfield, Contracting Officer, at Wayne.Mayfield2@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Wayne Mayfield at Wayne.Mayfield2@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed Jun 10, 2026FPI UNICOR REQUEST FOR QUOTE (AUT3763-262)
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-150BA is issued as a Request For Proposal. This award will be one award.. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is SMALL BUSINESS set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed Jun 10, 2026FPI UNICOR BASTROP REQUEST FOR QUOTE FIRE EXTINGUISHERS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-146BA is issued as a Request For Proposal. This award will be one award.. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is SMALL BUSINESS set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed Jun 10, 2026FPI UNICOR BASTROP REQUEST FOR QUOTE VEHICLE COMPONENTS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-145BA is issued as a Request For Proposal. This award will be one award, so all or nothing. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is NOT set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed Jun 10, 2026Law Enforcement Vehicle Upfit
The purpose of this modification is to: 1. Change the due date from June 3, 2026 to June 10, 2026 2. Update Attachment A Instructions to offerors to make the due date change 3. Update Attachment B SOW to conform with answers to questions in Attachment E 4. Provide anwers to questions submitted by vendors in Attachment E The Department of Homeland Security (DHS), Immigration and Customs Enforcement (ICE) has a requirement for full upfit of ICE Law Enforcement vehicles. This Request for Quote (RFQ) is prepared as a small business set-aside. The Government anticipates a Firm Fixed Price (FFP) contract type. The purchase order will have an anticipated period of performance of four (4) months.
US
Closed Jun 3, 2026UNICOR FPI BASTROP AUT3937/KIT0077
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-092BA is issued as a Request For Proposal. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is SMALL BUSINESS set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is a Small Business set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed Jun 3, 2026Law Enforcement Vehicle Upfit
The Department of Homeland Security (DHS), Immigration and Customs Enforcement (ICE) has a requirement for full upfit of ICE Law Enforcement vehicles. This Request for Quote (RFQ) is prepared as a small business set-aside. The Government anticipates a Firm Fixed Price (FFP) contract type. The purchase order will have an anticipated period of performance of four (4) months.
USThailand
Closed May 27, 2026One right-hand drive official vehicle
Enclosed is a request for quotations (RFQ) for one right-hand drive official vehicle, a passenger van. If you would like to submit a quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter. The U.S. government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price, technically acceptable, in accordance with FAR 52.212-1. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. Direct questions regarding this service may be submitted no later than 16:00 hours (Bangkok local time) on May 12, 2026 to e-mail: Pinlaorp@state.gov. Quotations are due by May 27, 2026 no later than 16:00 hours (Bangkok local time). No quotations will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted. Your quotation must be submitted electronically to e-mail: Pinlaorp@state.gov Please enter the subject line: Quotation Enclosed - RFQ#19TH2026Q0030 - One right hand-drive official vehicle. It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submitting their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at the time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.
USThailand
Closed May 27, 2026One right-hand drive official vehicle
Enclosed is a request for quotations (RFQ) for one right-hand drive official vehicle, a passenger van. If you would like to submit a quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter. The U.S. government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price, technically acceptable, in accordance with FAR 52.212-1. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. Direct questions regarding this service may be submitted no later than 16:00 hours (Bangkok local time) on May 12, 2026 to e-mail: Pinlaorp@state.gov. Quotations are due by May 27, 2026 no later than 16:00 hours (Bangkok local time). No quotations will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted. Your quotation must be submitted electronically to e-mail: Pinlaorp@state.gov Please enter the subject line: Quotation Enclosed - RFQ#19TH2026Q0030 - One right hand-drive official vehicle. It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submitting their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at the time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.
USThailand
Closed May 27, 2026One right-hand drive official vehicle
Enclosed is a request for quotations (RFQ) for one right-hand drive official vehicle, a passenger van. If you would like to submit a quotation, follow the instructions in Section 3 of the solicitation, complete the required portions of the attached document, and submit it to the address shown on the Standard Form 1449 that follows this letter. The U.S. government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price, technically acceptable, in accordance with FAR 52.212-1. We intend to award a contract/purchase order based on initial quotations, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. Direct questions regarding this service may be submitted no later than 16:00 hours (Bangkok local time) on May 12, 2026 to e-mail: Pinlaorp@state.gov. Quotations are due by May 27, 2026 no later than 16:00 hours (Bangkok local time). No quotations will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted. Your quotation must be submitted electronically to e-mail: Pinlaorp@state.gov Please enter the subject line: Quotation Enclosed - RFQ#19TH2026Q0030 - One right hand-drive official vehicle. It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submitting their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at the time of proposal submission may deem the offeror’s proposal to be considered non-responsible and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.
USGuinea
Closed May 27, 2026LARGE BOX TRUCK with electric lift
PUBLIC NOTICE (SOLICITATION NO: PR15989802) CLASSIFICATION CODE: 2320 – TRUCKS AND TRUCK TRACTORS, WHEELED NAICS CODE: 441110 – AUTOMOBILE DEALERS The United States Embassy in Conakry, Guinea intends to purchase a LARGE BOX TRUCK with electric lift manufactured in 2026. We invite automobile dealerships and responsible vendors from the general public to send us their quote on, or before, May 26, 2026 at 10:00 GMT. To be considered, offers must strictly adhere to the following specifications: SPECIFICATIONS FOR LARGE BOX TRUCK with electric lift Use: Warehouse Logistics, Equipment & Cargo Transport Capacity: Medium-duty cargo (3–5 ton payload) Preferred Chassis: Toyota or IVECO light/medium-duty truck (with proven local support) 1. Purpose To procure a self-contained box truck capable of supporting warehouse operations, including transportation of cargo, equipment, and supplies between embassy facilities. The vehicle must be suitable for Conakry road conditions and designed for durability, ease of loading/unloading, and availability of spare parts. 2. Vehicle Chassis & Cab Most Preferred Configuration (Recommended Standard): . Toyota Hino 300 Series . Closed box body . Hydraulic tail lift (rear-mounted) Alternative Acceptable Platforms: . IVECO Euro cargo . Mitsubishi Fuso Canter (subject to local support confirmation) General Requirements: . Drive: 4x2 . Engine: Diesel . Transmission: Manual preferred . Cab: Double cab preferred (crew cab); single cab acceptable Key Requirement: - Must have confirmed spare parts availability in Guinea / West Africa 3. Cargo Box (Closed Body Design) - Type: Fully enclosed dry cargo box - Payload: 3–5 tons minimum Construction: • Steel frame with aluminum or steel panels • Reinforced anti-slip floor Design Requirements: . Rear double doors (full opening) . Side access door (recommended) . Internal lashing points . Weatherproof / sealed against rain . Interior lighting (recommended) 4. Lifting Mechanism (Hydraulic Tail Lift – MANDATORY) Required System: - Rear-mounted hydraulic tail lift Specification: • Capacity: = 1,000 kg (1 ton minimum) • Operation: Electro-hydraulic • Platform: Foldable type Safety Features: . Anti-slip platform . Safety rails . Emergency stop . Manual override (recommended) 5. Chassis & Suspension • Heavy-duty rear leaf spring suspension • Reinforced chassis for box and lift integration • Adequate ground clearance for local roads 6. Safety & Operational Features • Reflective markings • Warning beacon/light • Reverse alarm • Rear camera (recommended) • Non-slip access steps • Fire extinguisher • Wheel chocks 7. Environmental Suitability . Suitable for heavy rain, high humidity, and rough road conditions . Anti-corrosion coating required . Fully sealed cargo box 8. Accessories & Spare Parts . Tail lift system complete with controls . Starter Spare Parts Kit: . Hydraulic seals . Electrical fuses . Basic lift components . Standard vehicle service items 9. Documentation & Training • Operator and maintenance manuals (English preferred) • Tail lift system documentation • Spare parts list • Training includes: • Safe operation of vehicles • Tail lift operation • Cargo handling • Basic maintenance 10. Warranty & Support . Minimum 6 months’ warranty after received at post . Vendor must confirm local service capability and spare parts availability 11. Acceptance & Testing at Delivery . Road test . Tail lift functionality test . Cargo loading/unloading simulation . Verification of safety systems Inspection of cargo box sealing and structur APPLICABLE CLAUSES AND PROVISIONS Please note that this is a combined synopsis/solicitation for a commercial item, prepared in accordance with the format FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested, and a written solicitation will not be issued. The solicitation number is PR15989802 and is issued as a Request for Quotation. The solicitation/contract includes all applicable provisions and clauses in effect through FAC 2005-55. Contract Clauses in addendum to FAR 52.212-1, Instructions to Offerors-Commercial Items, applies to this acquisition. Award will be made to the lowest priced, technically acceptable offeror. FAR clause 52.212-4, Contract Terms and Conditions-Commercial items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR 52.212-5, Contract Terms and Conditions to Implement Statutes or Executive Orders - Commercial Items (https://www.acquisition.gov/far/current/html/52_212_213.html#wp1179527 – include in full text), will apply to the resultant contract: 52.203-10, Price or Fee Adjustment for Illegal or Improper Activity. The following DOSAR provisions/clauses will also apply: 652.206-70, Competition Advocacy/Ombudsman; 652.214-71, Authorization to Perform; 652.225-70, Arab League Boycott of Israel; 652.225-71, Section 8(a) of the Export Administration Act of 1979, as Amended; 652.242-70, Contracting Officer’s Representative; and, 652.243-70, Notices. All offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications - Commercial Items with their offer. Offers are due by May 26, 2026 at 10:00 a.m. All responsible sources may submit an offer that shall be considered. All contractors have to be registered in the SAM (System for Award Management) Database https://www.sam.gov prior to contract award pursuant to FAR provision 52.204-7. Therefore, prospective offerors are encouraged to register prior to the submittal of quotations/proposals. The guidelines for registration in SAM are also available at: https://www.statebuy.state.gov/pd/Pages/AdditionalVendorReg.aspx Furthermore, with the recent FAR update, it is now a mandatory requirement for the Government to enquire if contractors are using or will be using, in government contracting, covered telecommunications equipment produced by Huawei, ZTE, Hikvision, Dahua, and Hytera, or their subsidiaries or affiliates. Consequently, vendors are required to update their SAM registration with that information. Potential offerors are advised to take special attention to clauses FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 while completing their registration in SAM. PREFERRED METHOD OF CONTACT Offers must be submitted via electronic mail to the Contracting Officer at ConakryProc@state.gov and citing the solicitation number PR15989802 in the subject line of the email. For questions regarding the specifications provided above or other technical details, please contact Tinkiano Gaston Faya at TinkianoGF@state.gov. You will need to check this website periodically for updates. We thank you for your interest. OFFER DUE DATE Offers are due on or before May 26, 2026, at 10:00 GMT.
USMorocco
Closed May 26, 2026Purchase of One (1) Mid-Size Sport Utility Vehicle (SUV) for US Embassy Rabat
The U.S. Embassy Rabat has a requirement for the provision and delivery of one (1) Mid-Size Sport Utility Vehicle (SUV) in accordance with the specifications and the terms and conditions set forth herein. The U.S. Government intends to award a contract/purchase order resulting from this solicitation to the lowest-priced, technically acceptable (LPTA) offeror/quoter who is a responsible contractor, in accordance with FAR 52.212-1. The Government intends to make an award based on initial quotations without holding discussions; however, discussions may be conducted with vendors within the competitive range if necessary. Vendors are advised that offers will be evaluated solely on the mandatory specifications listed below. Additional features or options beyond the stated requirements may be accepted by the Government but will not be considered in the technical evaluation nor factored into the ranking of vendors’ price. Pricing information for any optional features will be disregarded. Quotation Due Date: 17:00 GMT+1 on May 26, 2026. All offers shall be Firm Fixed Price (FFP). The quoted price must include all labor, materials, overhead, profit, and transportation necessary to deliver the vehicle to the U.S. Embassy Rabat. Payment will only be made for items explicitly itemized in the vendor’s quotation. No additional charges not included in the submitted quotation will be considered. The applicable Value Added Tax (VAT) should be separately listed in the quotation or invoice. Delivery timelines will be considered during the technical evaluation. The Government reserves the right to place an order with any vendor whose offered SUV meets all mandatory specifications and can ensure delivery in the shortest timeframe, preferably within 45 days of order issuance. If the awarded vendor fails to deliver within the agreed timeframe, the Embassy reserves the right to withdraw the order unilaterally and procure the vehicle from another vendor. An invoice shall be issued only after delivery of the vehicle and submission of all required documentation. Full payment will be made within 30 days of receipt of a proper invoice. Only companies or individuals specializing in this field should apply. 15. SAM Registration: • Notwithstanding FAR 4.203-1(b)(5)(ii), the Contracting Officer has determined that it is in the best interest of the U.S. Government to accept quotations from offerors that are and are not registered in the SAM (System for Award Management) database at https://www.sam.gov • Offerors with an active SAM registration need only provide their Unique Entity Identifier (UEI) number and are not required to complete the information in 52.204-90 since relevant information is found in their SAM registration. • Offerors without an active SAM registration must complete FAR 52.204-90, Offeror Identification, in Section 5, Representations and Certifications. This information must be updated annually if option years are included in the solicitation or award. Interested parties shall submit their quotation electronically to rabatgsocontracts@state.gov. Electronic submissions must not exceed 30MB in total size. In order for a quotation to be considered, you must also complete and submit the following : 1. SF-1449 2. Section I, Pricing 3. Section 5 Representations and Certifications I.II SCOPE OF WORK 1. Introduction The U.S. Embassy Rabat requires the supply and delivery of one (1) new 2026 model-year Mid-Size Sport Utility Vehicle (SUV). The vehicle must be commonly available in Morocco to ensure operational blending, serviceability, and availability of spare parts. 2. Vehicle Category & General Requirements The contractor shall provide a vehicle that meets or exceeds the following minimum specifications: • Type: Mid-Size Sport Utility Vehicle (SUV) • Model Year: 2026 (brand new, unused) • Seating Capacity: 5 to 7 passengers • Drive Configuration: AWD or 4WD • Fuel Type: Diesel, Gasoline, or Hybrid • Transmission: Automatic (6–8 speed preferred) • Steering: Left-Hand Drive (LHD) • Exterior Color: Gray or Black • Interior Color: Black or dark tone • Availability: Vehicle must be available from a dealer in Rabat or surrounding cities • Warranty: Minimum 5 years or 150,000 km • Make/Model: Must be a mid-size SUV commonly found in Morocco 3. Engine & Performance Requirements • Engine power: 180–300 horsepower (or equivalent hybrid output) • Engine size: Minimum 4 cylinders, displacement 2.0L–3.5L (or equivalent hybrid output) • Towing capacity: Minimum 2,000 kg • Start/Stop technology • Power steering • Fuel efficiency consistent with mid-size SUV standards • Suitable for mixed urban and off-road conditions 4. Dimensions & Capacity • Overall length: 4.6 m – 5.0 m • Cargo volume: ≥ 700 liters with rear seats up • Ground clearance: ≥ 200 mm • Turning radius appropriate for urban maneuvering 5. Safety & Driver Assistance SystemsI.II SCOPE OF WORK 1. Introduction The U.S. Embassy Rabat requires the supply and delivery of one (1) new 2026 model-year Mid-Size Sport Utility Vehicle (SUV). The vehicle must be commonly available in Morocco to ensure operational blending, serviceability, and availability of spare parts. 2. Vehicle Category & General Requirements The contractor shall provide a vehicle that meets or exceeds the following minimum specifications: • Type: Mid-Size Sport Utility Vehicle (SUV) • Model Year: 2026 (brand new, unused) • Seating Capacity: 5 to 7 passengers • Drive Configuration: AWD or 4WD • Fuel Type: Diesel, Gasoline, or Hybrid • Transmission: Automatic (6–8 speed preferred) • Steering: Left-Hand Drive (LHD) • Exterior Color: Gray or Black • Interior Color: Black or dark tone • Availability: Vehicle must be available from a dealer in Rabat or surrounding cities • Warranty: Minimum 5 years or 150,000 km • Make/Model: Must be a mid-size SUV commonly found in Morocco 3. Engine & Performance Requirements • Engine power: 180–300 horsepower (or equivalent hybrid output) • Engine size: Minimum 4 cylinders, displacement 2.0L–3.5L (or equivalent hybrid output) • Towing capacity: Minimum 2,000 kg • Start/Stop technology • Power steering • Fuel efficiency consistent with mid-size SUV standards • Suitable for mixed urban and off-road conditions 4. Dimensions & Capacity • Overall length: 4.6 m – 5.0 m • Cargo volume: ≥ 700 liters with rear seats up • Ground clearance: ≥ 200 mm • Turning radius appropriate for urban maneuvering The vehicle must comply with Motor Vehicle Safety Standards that include the following: Safety Systems • ABS (Anti-lock Braking System) • ESP (Electronic Stability Program) • Traction control • Multizone airbags (driver, passenger, side, curtain) • Automatic door locking • Alarm system • Tempered side and rear windows • Seat belts for all seats Driver Assistance • Adaptive cruise control • Lane-keeping assist • Blind-spot monitoring (preferred) • Rear-view camera or 360° camera • Front and rear parking sensors • Satellite navigation (built-in GPS) 6. Interior Features & Comfort • Multizone climate control (dual-zone or tri-zone) • Power windows and power door locks • Power mirrors • Power seats • Keyless entry and push-button start • Infotainment system with: o Touchscreen display (≥ 8 inches) o Bluetooth connectivity o USB ports / hands-free charging o Apple CarPlay / Android Auto compatibility • Floor mats (front and rear) • Foldable rear seats for expanded cargo space 7. Exterior Features • Alloy wheels: 18–20 inches • LED headlights and daytime running lights • Fog lamps • All-season tires • Window tinting (in compliance with Moroccan regulations) • Tow hitch (factory or dealer installed) • Rustproofing and undercoating (manufacturer standard) 8. Electrical & Standard Equipment • Manufacturer-standard electrical system • Manufacturer-standard radio and speakers • Manufacturer-standard accessories 9. Documentation Requirements The contractor shall provide the following upon delivery: • Owner’s manual (English) • Warranty documentation • Maintenance schedule • Technical repair manuals and parts catalog (1 set) • Dealer and service center information 10. Offer Validity The offer shall remain valid for a minimum of forty-five (45) calendar days from the date of quotation submission. Pricing and terms must remain firm for the full validity period 11. Technical Documentation The Offeror shall include in the technical proposal: • Brand, type, model number • Detailed specifications and technical data • Color chart (interior and exterior options) • A compliance sheet demonstrating conformity with all mandatory requirements 12. Service & Warranty Support • Dealer must provide warranty services within 100 km of U.S. Embassy Rabat • Vendor must ensure availability of in-country spare parts and service support. 13: DELIVERY: - Delivery Location: Embassy of the United States of America Km 5.7, Avenue Mohamed VI Souissi, Rabat, Morocco - Delivery Timeline: Within 45 days of contract award
USLaos
Closed May 25, 2026Supply Sport Utility Vehicle for US Embassy Vientiane
19LA9026Q0007: Supply Sport Utility Vehicle for US Embassy Vientiane. See attached RFQ for details.
US
Closed May 22, 2026UNICOR FPI BASTROP FIRE EXTINGUISHERS/STRAPS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-124BA is issued as a Request For Proposal. It is the Government's intent that this notice will result in single award. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is SMALL BUSINESS set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.
US
Closed May 22, 2026Maintenance Diagnostics Scanner/Tablet for Ford Integrated Diagnostic System : 1996 to present coverage of Ford/ Lincoln/ Mercury vehicles.
This requirement is for the procurement of the TEXA AXONE Voice Deluxe Fleet Package and specific OEM diagnostic software/hardware components. The required system provides comprehensive diagnostic, troubleshooting, and reflashing capabilities for a diverse fleet of commercial, heavy-duty, and off-highway vehicles. Contract will be firm-fixed price. Offer must meet all specifications in Attachment 1 (Conformance Matrix) to be considered. Evaluation Criteria are provided in the Addendum to 52.212-2. To ensure compatibility with existing fleet infrastructure and OEM proprietary systems, the following specific brand-name items and part numbers (or exact OEM equivalents) are required: Base Diagnostic System: TEXA AXONE Voice Deluxe Fleet Package (Includes Axone Voice tablet, Multihub 2 interface, HD Truck/Off-Highway/Car software, and annual support). TEXA Service Information Databases & Hardware: TEXA CAR Service Information Database (1-Year Subscription) TEXA HD Truck Service Information Database (1-Year Subscription) TEXA Off-Highway Service Information Database (1-Year Subscription) TEXA Off-Highway Essential Cables Kit (PN: S049C8/C9) Ford OEM Diagnostic Equipment & Subscriptions: Ford Integrated Diagnostic System (IDS) OEM Package (Includes VCM-III module, IDS software, 1-Year updates/calibration downloads) Ford Medium Duty Truck 9-Pin to Deutsch adapter cable Ford Sync Cable for IDS application Chrysler OEM Diagnostic Equipment & Subscriptions: Chrysler wiTECH OEM Package (Includes Mopar Diagnostic Pod interface, wiTECH 2.0 software license) Chrysler Tech Authority Subscription (365 days of access) Power Supply Equipment: DC Reflashing Power Supply Charger (Minimum 55-Amp to 70-Amp rating, fully automatic, selectable voltages)
US
Closed May 22, 2026UNICOR FPI BASTROP (KITMOBILEDEVICEMNT)
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included within this notice. Solicitation, Evaluation and Award(s) will be in conjunction with policies and procedures as prescribed in FAR 13, Simplified Acquisition Procedures. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number CW26-111BA & CW26-133BA is issued as a Request For Proposal. It is the Government's intent that this notice will result in single award. Federal Prison Industries, Bastrop is issuing this solicitation notice for the requirements of Vehicle Component(s). This may be for hardware, material, instructions, or a combination of parts required in the uplift of vehicles. This solicitation is SMALL BUSINESS set‑aside. The NAICS code for this solicitation is 423120. Deliveries will begin when the Contracting Officer issues a signed Award Document to the Vendor. Deliveries MUST be completed within the delivery date specified, upon Award. Deliveries will be made to UNICOR Federal Prison Industries 1341 Hwy. 95 N., Bastrop TX 78602. The Government reserves the right to make single or multiple awards based on Best Value. The Government will award to the responsible businesses whose quote, conforming to the solicitation, is most advantageous to the Government based on Best Value. Best Value will be determined by evaluating each quotation for one or more of the following: PRICE, TECHNICALLY ACCEPTABLE, DELIVERY (ARO), AND PAST PERFORMANCE. Awards will be issued with a Purchase Card or through a Purchase Order, SF-1449. All future information about this solicitation, including solicitation amendments, will also be distributed through this site. Interested parties are responsible for monitoring this site to ensure they have the most up‑to‑date information about this solicitation. Refer to the posted solicitation for due date regarding receipt of quotes (page #1, block #8). The point of contact for all information regarding this solicitation is Chelsea Walker, Contracting Officer, at Chelsea.walker3@usdoj.gov. Quotations are required to be received electronically to the above mentioned contact, on or before the due dates specified within the solicitation. The only format in which questions will be answered is by e‑mail (no phone calls please). Faith Based and Community Based Organizations have the right to submit quotes equally with other organizations for contracts for which they are eligible. ANY QUESTIONS REGARDING REQUIREMENTS LISTED, SPECIFICATIONS OR THE SOLICITATION PROCESS MUST BE REQUESTED in writing to Chelsea Walker at Chelsea.walker3@usdoj.gov. At no time should offerors contact factory or Central Office staff with questions regarding this request for quotation (RFQ). All questions MUST be addressed in writing. No questions will be answered via telephone.